1. The device may only be put into operation if the housing, the power cable, and the plug are all completely intact; otherwise, its use is strictly prohibited.
   
   
2. Always place the wax into a removable container before inserting it into the machine, then connect it to a 220-240V power outlet and wait approximately 20-25 minutes for the wax to reach its ready-to-use temperature.
   
   
3. The built-in thermostat maintains the wax at an ideal temperature throughout the treatment, so there is no need to remove it from the device, though you should avoid continuous operation at the highest heat setting to preserve the machine's lifespan.
   
   
4. The wax heater requires no special maintenance, and cleaning the exterior with an alcohol-based, slightly damp cloth is sufficient, provided you ensure safe operation and take care to preserve the condition of the unit.

1. The device may only be put into operation if the housing, the power cable, and the plug are all completely intact; otherwise, its use is strictly prohibited.
   
   
2. Always place the wax into a removable container before inserting it into the machine, then connect it to a 220-240V power outlet and wait approximately 20-25 minutes for the wax to reach its ready-to-use temperature.
   
   
3. The built-in thermostat maintains the wax at an ideal temperature throughout the treatment, so there is no need to remove it from the device, though you should avoid continuous operation at the highest heat setting to preserve the machine's lifespan.
   
   
4. To clean the housing, use an alcohol-based, slightly damp cloth while ensuring the safety and maintenance of the device's condition.

Manufacturer and distributor:
Alveola Ltd.
Hungary, 1143 Budapest Gizella street 28/a
Tel: +36 1251 2270
information [at]alveola.com